Veroboard - Non Eurocard Format
Veroboard - Single sided boards:Ideal for development and prototyping work, Veroboard is designed primarily for hard wiring of discrete components, typically in analogue circuits, but is equally useful where a a number of common bus or signal lines are required. Veroboard is manufactured from copper clad laminayted board which has been pierced with a grid of holes and machined to provide parallel tracks. Features:
Material: SRBP. Copper clad laminate to BS4584 part 5 Maximum working temperature 97 deg C Nom board thickness. 1.6mm Copper thickness. 35 Micron or 1 oz/ft2 |  |
| Board Dimensions | No. of Tracks | Holes / Track | Material | Order Code |
| 121.92 X 101.60 | 41 | 44 | SRBP | 01-0021 |
| 100.84 X 162.56 | 28 | 64 | SRBP | 07-0008 |
| 111.76 X 176.63 | 40 | 61 | SRBP | 01-0014 |
| 204.75 X 393.70 | 78 | 155 | SRBP | 67-1902 |
| 95.10 X 454.66 | 34 | 179 | EPOXY | 01-0112 |
| 95.10 X 454.66 | 34 | 179 | SRBP | 01-0040 |
| 119.38 X 454.66 | 36 | 179 | SRBP | 01-0041 |
| 119.38 X 454.66 | 8 | 179 | SRBP | 01-0043 |
| 179.07 X 454.66 | 60 | 179 | SRBP | 01-0042 |
| 100.00 X 500.00 | 36 | 197 | SRBP | 01-27567 |
| 100.00 X 500.00 | 36 | 197 | EPOXY | 01-27568 |
Verostrip - Single sided boards:This is a variant on the Veroboard design with the tracks running at 90 degrees to the conventional format. Ideal for development and prototyping work, Verostrip boards have been designed for use with hard wiring of discrete components, typically in analogue circuits, where a conventional tag strip or group board are required. Verostrip is manufactured from copper clad laminayted board which has been pierced with a grid of holes and machined to provide parallel tracks. Features:
Material: SRBP. Copper clad laminate to BS4584 part 5 Maximum working temperature 97 deg C Nom board thickness. 1.6mm Copper thickness. 35 Micron or 1 oz/ft2 | ||
| Board Dimensions | No. of Tracks | Holes / Track | Material | Order Code |
| 38.10 X 214.60 | 81 | 15 | SRBP | 01-0171 |
