MINIWRAP HEADED PINS (TYPES 1 & 2)
For mounting discrete components. These pins feature a 0,89 mm cross-cut slot on the component side to locate component leads for assembly. Material: All wire wrapping pins are manufactured from brass to BS249 and gold plated over a copper and nickel finish (unless otherwise stated) Post size: 0,61 mm square, 0,86 mm diagonal. Ordering information
Supplied in packets of 100 |  | |||||||||||||||||
MINIWRAP SOCKET PINS (TYPES 3, 4)These pins have 4-leaf spring beryllium copper inserts enabling components to be plugged directly into sockets. Type 3 is a low-profile pin allowing components to be mounted close to the board surface Type 4 has a higher profile allowing heat to be dissipated by convection between the components and the board Prototyping board accessories: Headers and socket pins Ordering information
Supplied in packets of 100 pins |  | |||||||||||||||||
MINIWRAP SOCKET TERMINAL HEADER PIN (TYPE 7)May be mounted directly into header board or alternatively plugged into socket pins (66-3472C - type 3) or (66-3505A - type 4).
|  | |||||||||||||||||
MINIWRAP TERMINALS (TYPE 9)Suitable for use with all types of boards. This pin may be soldered to a copper track or pad to ensure electrical continuity.
|  | |||||||||||||||||
TEST POINT PINS (TYPE 12)These pins feature a turreted lug on the component side, guaranteeing a firm connection using a clip-on style test probe. Ordering information
Supplied in packets of 100 |  | |||||||||||||||||
