Plug-in Boards
1/. PLUG-IN VEROBOARD
This board combines the unique Veroboard pattern with the 37 way 2,54mm pitch direct edge connector. Intended primarily for hard wiring of discrete components it is equally useful where a number of common bus or signal lines are required.
Features
Ideal for hard wired applications
37 way 2,54mm pitch gold plated tongue
Board specification
Base material SRBP
Single sided copper BS4584 part 16
Max. working temp. 155oC
Nom. board thickness (inc. copper) 1,6mm
Copper thickness 35m or 1oz/ft2 or 305g/m2
Ordering information
Dimensions Tracks Holes/Track Material Order Code 100 x 160 mm 37 57 SRBP 09-1036
Note: hole grid 2,54 x 2,54mm Hole dia. 1,02mm Contact pitch 2,54mm
2/. DIP PLUG-IN BOARD:
FOR SINGLE AND DOUBLE SIDED CONNECTORS
This range of DIP boards is provided with either single or double sided contacts for interfacing via direct, edge card connectors. Primarily low density, they have been designed for hard wiring of integrated circuits. A test point facility is given by copper pads situated at the front end of each board.
Features
Ideal for hard wiring applications
Single or double sided contacts
Profiled or full width gold plated tongue 90.73 mm
Contact pitch and number of ways 3.96 mm
Grid pattern to aid component layout
Test point facility
Board specification
Board type Epoxy glass
Double sided copper BS4584 part 16
Max. working temp. 155oC
Nom. board thickness (inc. copper) 1,6mm
Copper thickness 35m or 1oz/ft2 or 305g/m2
Ordering information
Description: DIP Plug-in board for single and double sided connectors
Dimensions Rows/pads No Ways Material Order Code 114.3 x 165.1 4/39 22/22 Epoxy 06-0147
Note: Hole grid 2,54 x 2,54mm Hole dia. 1,02mm
