Terminal Pins for WireWrap Pressfit and Solder Technology

Versatile PCB terminal & prototyping pins
Released 09 August 2010

Vero Technologies’ PCB terminal pin family all feature either a knurled or a 4-zone barbed pressfit design to ensure good electrical continuity in PTH boards and to resist rotation or withdrawal during use. Terminal pins are predominantly used during original prototyping during development or for breadboarding modifications, extensions or adaptations in existing board layouts. Typically hand assembled into the PCB, they are an efficient low cost way of providing a selection of physical interconnect interfaces with single-sided, double-sided or multilayer PCBs. Available designs include ones to which leaded components can be soldered, mini wire-wrap sockets, headers and test points, all in single and double sided options. Also available are wire wrap pins with a 0.86 mm diagonal that are suitable for conventional standard and modified wrap techniques.

The Vero Technologies range are suitable for nominal 1.02, 1.32 or 1.45mm hole diameters and includes versions suitable for use with any PCB as well as designs specifically optimised for use with the company’s own Veroboard & Options prototyping boards. All versions are available from stock at http://www.verodirect.com/products.asp?category=Prototyping+Components&s...

*** Ends: body copy 173 words ***

Notes to editors.

For further information:

Paul Hoath
Vero Technologies Ltd.
Unit 25, Solent Industrial Estate
Hedge End
Hants
SO30 2FY
Tel:  + 44 (0)1489 776933
Fax:  + 44 (0)1489 776938
sales@verotech.co.uk
www.verotl.com

Agency contact:       
Nigel May   
Parkfield Communications Limited
Parkfield House
Damerham
Hants
SP6 3HQ
tel: + 44 (0)1725 518321
fax: + 44 (0)1725 518378
nigel.may@parkfield.co.uk
www.parkfield.co.uk